grubbicon
Web Wheeler
When in doubt bounce it out
Posts: 202 
My Rig: Big Tymer
|
Post by grubbicon on Jan 12, 2017 3:09:39 GMT
|
|
|
|
Post by Blackbeard on Jan 12, 2017 3:11:12 GMT
And the bouncer has arrived! You got that thing ready to roll again?
|
|
madmedic
Stock
Posts: 25
My Rig: 2016 Rubicon
|
Post by madmedic on Jan 12, 2017 3:13:47 GMT
What up grub! Bouncer looks good man! You bout to get it back together?
|
|
grubbicon
Web Wheeler
When in doubt bounce it out
Posts: 202
My Rig: Big Tymer
|
Post by grubbicon on Jan 12, 2017 3:25:29 GMT
This wouldn't be a party without the bouncer. Naw I haven't was supposed to go back home and work on it but decided not to deal with Atlanta freaking out about the weather. I plan to go back and tear it apart this weekend so tire and rad can get fixed. Need to do a serious nut and bolt check and add ALOT of locktite. Found some very important loose bolts, believe it or hammering down likes to loosen some stuff up.
|
|
|
|
Post by Blackbeard on Jan 12, 2017 3:31:05 GMT
Probably a good idea to go over everything.
|
|
grubbicon
Web Wheeler
When in doubt bounce it out
Posts: 202
My Rig: Big Tymer
|
Post by grubbicon on Jan 12, 2017 3:33:22 GMT
Probably a good idea to go over everything. Yeah we were standing there in the parking lot and a buddy found a upper control arm bolt loose and all bolts on my fuel cell were loose. So I plan to go back and lock tite everything to stop that crap. |
|
|
|
Post by trailless on Jan 13, 2017 3:20:55 GMT
That bouncer is ridiculous!
|
|
|
|
Post by Draconianwinter on Jan 13, 2017 17:28:05 GMT
One of these days maybe I can get one or build one (though if I build one it may well just end up looking like an old cartoon where the body and everything just falls apart lol), but damn they do look fun to play in
|
|
|
|
Post by coop on Jan 13, 2017 18:38:43 GMT
Good to see some familiar folks on here!
|
|
|
|
Post by coop on Jan 17, 2017 13:29:07 GMT
Probably a good idea to go over everything. Yeah we were standing there in the parking lot and a buddy found a upper control arm bolt loose and all bolts on my fuel cell were loose. So I plan to go back and lock tite everything to stop that crap. Jeep Wave from End of Summer Run by Scott! 
|
|
|
|
Post by coop on Jan 18, 2017 12:25:27 GMT
Probably a good idea to go over everything. Yeah we were standing there in the parking lot and a buddy found a upper control arm bolt loose and all bolts on my fuel cell were loose. So I plan to go back and lock tite everything to stop that crap. One suggestion from my racing days; The GTP mechanics always used Permatex Blue RTV for securing the bolts and nuts. It also serves as a final check after torqueing, as it's easy to see that you have indeed torqued and checked everything. You put a dab/blob on the nut or bolt and joint of the of the nut or bolt to whatever the surface is. Don't skimp on the dab or blob, but don't go crazy as this is tough shit. This is damn secure and only comes off with a razor blade or knife. Has worked for me for many years. My 2 cents.
|
|
